LAUNCH A2 X-881 PRO Mobile 3D Wheel Aligner + LAUNCHER 2 post lift + TSAP3 + 20 x TPMS + U600 (Q4-2026)
LAUNCH X-881 PRO is a professional mobile 3D wheel aligner that is based on a user-friendly interface communicating with two smart imaging cameras.
Announcing the release of a new LAUNCH professional mobile 3D wheel aligner powered by LAUNCHER Canadian Advanced Technologies.
LAUNCH X-881 PRO is equipped with Dynamic Constitute Coordinate (DCC) which is a new revolutionary technology in the wheel alignment industry allowing the LAUNCH X-881 PRO to work on uneven surfaces with variance of 30 degrees. This DCC technology makes the LAUNCH X-881 PRO a mobile wheel aligner. It allows the mechanic to move the aligner and generate alignment reports on different bays, which increases shops’ productivity.
The revolutionary software of LAUNCH X-881 PRO is compatible with 2post lifts and all other lift types. A lucrative function that enables shops to perform easy alignment jobs on 2 post lifts that increases the shop’s revenue without having to invest in a space demanding, budget restraining 4 post or scissor lift. The smart dynamic of this revolutionary software reads and records the initial measurements of loaded suspension of the vehicle on ground. When performing adjustments to the vehicle jacked on the 2-post lift, the adjustments are made to the initial measurements that were recorded when the suspension was loaded on ground and NOT to the hanging suspension in the air.
LAUNCH X-881 PRO is equipped with a VIN decoder that saves time and error selecting the vehicle’s VIN number while matching OE specs provided by the OE built-in database. LAUNCH X-881 PRO also performs ADAS Pre-calibration wheel alignment jobs according to OE specs.
Freely generates three different types of reports that can be saved, printed, or emailed at your convenience.
Key functions:
- Pre ADAS calibration alignment specs
- Seamless software with step 2 step illustration
- Works on 2 post lifts and other lifts
- Mobile aligner, space saver
- OE database included
- Hand held tablet (optional)
LAUNCHER Hoist Warranty
| Component | Warranty |
|---|---|
| Structural Parts | 5 Years |
| Hydraulic | 2 Years |
| Electrical | 2 Years |
| Labor | No Warranty |
TSAP3
- Display all TPMS sensors data on screen
- Program over 20 aftermarket sensors
- Update wirelessly via Wi-Fi
- Activates both 315 & 433 Mhz sensors
- Read and activate TPMS sensors
- Perform 200+ manual & OBDII relearns
- Install & service TPMS retrofit kits
- Service motorcycles & dually vehicles
- Lookup TPMS sensor part number
- Test/ Diagnose vehicle keyfob
TPMS 20 Sensors
The Launch TPMS Sensors are universal, programmable tire-pressure sensors with a compact design and optimized RF antenna—offering reliable, OE-level performance and compatibility with over 98% of vehicles. With long-lasting battery life, wireless reprogramming, and precise pressure accuracy (±1.4 psi), it delivers seamless installation, exceptional durability, and peace of mind for technicians and end users alike.
- LTR TPMS Sensor Pack of 20 (301050885)
- LTR TPMS Sensor Pack of 40 (301050886)
- LTR TPMS Sensor Pack of 100 (301050887)
- LTR TPMS Sensor Pack of 200 (301050888)
- The LTR-V is significantly smaller than its predecessorbut offers a stronger signal.
- Optimized RF antenna for better signal transmission.
- Able to replace all the OE tire pressure sensors, copy theOE sensor data and can be Aprogrammed for unlimitectimes.
- Compatible with more than 98% of OE sensors in 315MHz/433MHz.
- Over-the air wireless programming and battery life lastsfor 4 to 5 years.
- The pressure value of LTR Sensor can be accurate to0.1BAR with an international leading automotive-grade chip.
- Frequency: 433 MHz / 315 MHz
- Operating Voltage: 3.0 V
- Transmission Power: 5–8 dBm
- Operating Temperature: -40°F to 125°F
- Product Dimensions: 27.2 × 20 × 76.4 mm
(1.07 × 0.79 × 3.01 inches)
U600
LAUNCH U600 DTC Query is an innovative diagnostic tool designed to make vehicle troubleshooting seamless and efficient for users worldwide. With its advanced features and extensive multilingual support, it caters to a global audience, breaking language barriers in automotive diagnostics. Supporting languages like English, French, Spanish, German, Chinese, and more, the U600 ensures users can decode Diagnostic Trouble Codes (DTCs) and access detailed explanations in their preferred language.
Features
- DTC Query
- Multiple Languages
- Software Upgrade via USB
- Graphical Display for 4 Data Streams
- Data Stream Storage Playback
- Print the Diagnostic Report
- Read DTCs, Clear DTCs, and Read Data Streams for ABS/SRS/AT/Engine System of overseas mainstream models
Reset Function
- Oil Lamp Reset
- Electronic Brake Pad Reset
- Steering Angle Reset
- DPF (diesel particulate filter) Reset
- ABS Brake Exhaust Reset
Specifications
- Screen: 4.0 TFT 320*480DPI
- Voltage Range: 9-18V
- ENV/OPS TEMP: -20°C70°C/0°C50°C
- Dimension: 195mm86mm32mm (7.6 3.4*1.2)
- Weight: 420g
